Crimping guide (TO DO)
Choosing temperature sensors
Connecting thermistors and PT1000 temperature sensors
Connecting PT100 temperature sensors
Connecting thermocouples
Connecting Digital Humidity and Temperature (DHT) sensors
Configuring the on-board MCU and stepper driver temperature sensors
Heaters overview
Connecting and configuring extruder heaters
Connecting and configuring a bed heater
Connecting and configuring a chamber heater
Tuning the heater temperature control
Connecting and configuring fans
Choosing stepper motors
Choosing an extruder drive
Connecting stepper motors
Connecting external stepper and servo motor drivers
Configuring stepper motors
Testing stepper motors
Tuning stepper motor drivers
Connecting hobby servos and DC motors
Connecting endstop switches
Stall detection and sensorless homing
Test homing behaviour
Connecting and configuring filament-out sensors
Choosing a Z probe
Connecting a Z probe
Connecting a Z probe - BLTouch
Test and calibrate a Z probe
Setting up automatic probing of the print bed
Bed levelling using multiple independent Z motors
Using the Manual Bed Levelling Assistant
Mesh bed compensation
Connecting an accelerometer
Connecting an Emergency Stop
Adding additional output ports
Controlling unused IO pins
Using triggers to control the Duet
Neopixel and DotStar LEDs
CNC Pendant
Connecting a PanelDue
Connecting 12864 and other displays
12864 display menu system